|
|
 |
 |
 |
 |
|
|
|
 |
|
Laymatic-PRO II N is the basic model of a compact digital processor excellent in cost performance.
It accommodates basic functions necessary for 3D measurement such as scaling function, axial shifting, polar shifting, reset and preset
A compact display unit is provided at the head section of the layout machine's main body, so the operator can always watch the screen at his or her eye level. |
|
|
 |
|
|
|
|
 |
LED, bright and visible, is used for the display. |
|
The display panel is positioned at the head section of the main body of the layout machine so that the operator may watch it at eye's level anytime. |
|
Operating each of various functions can be made from the operator's position. |
|
RS-232C interface. |
|
Function of outputting any character. The characters one selects arbitrarily can be output from RS-232C. |
|
|
|
|
|
|
|
|
|
|
|
| Laymatic PRO II N System |
| Display |
7 segmented LED |
| Reading type |
magnetic |
| Reading minimal |
0.01mm |
| Maximum number of digits |
5 digits (sequence number)
7 digits (coordinates) |
| Maximum display |
+99999.99
-9999.99 |
| Maximum response |
250m/min |
| Scale accuracy |
(0.05+0.01) L mm (A, E TYPE)
(0.03+0.01) L mm (J-SYSTEM) |
| Electricity |
AC100-250V ±10% (50/60Hz) single phase |
| Power consumption |
max.50 VA |
| Ambient environment Ambient temperatures |
0-40° (in operation)
-20-60° (not in operation) |
| Ambient humidity |
20-80% (in operation)
8-80% (not in operation)
(However, the maximum wet bulb temperature is 29 degrees, without condensation.) |
|
|
|
|
 |
|
 |
|
|
|
 |
|
This is a high end digital processor featuring all necessary functions for 3D measurement.
Various kinds of calculation functions for coordinates shifting, circle, distance, intersection point, crossing angle are provided, thus eliminating the necessity of alignment of a work piece to be measured.
In addition, customization of user's key, icon and abbreviated keys is possible to grade up work efficiency. |
|
|
|
|
|
|
|
| <Extensibility> |
|
This hardware is a PC-based unit with excellent versatility in extension. |
|
| <Versatility in function> |
|
Integrating a floppy-disc, able to easily execute data handover |
|
Exchange of the coordinates makes it possible to eliminate troublesome alignment of the work piece. |
|
Provision of various kinds of calculation functions for coordinates shifting, distance, intersection point, crossing angle are provide to eliminate niggling hand calculation. |
|
Customization of user's key, icon and abbreviated keys enables speed-up of calculations. |
|
An online help is provided. |
|
Positioning of the ball tip is corrected automatically using the auto-dummy point. |
|
Adopting a MIH-S makes it easy to change the probe's position. |
|
There is a function of element calculation. Calculation is possible with use of calculation results and with reciprocal references of results. |
|
| <Excellent in operability> |
|
It is possible to operate with the icon, mouse and cursor key with no need of memorizing the function numbers. |
|
Excellent visibility
|
|
TUse of a TFT color liquid crystal panel allows arranging the display section and main body into a single block. Chronological steps of measurement, current measurement and operation contents can be recognized immediately. |
|
| In addition! |
|
Designed focusing on prompt response, and on high speeds, for the operator to continue work without feeling stress. |
|
|
|
|
|
|
|
|
|
|
|
| Laymatic MEGA System |
| Display |
10.4inchTFT |
| Reading type |
Magnetic or optical reading type |
| Reading minimal |
0.05mm (optical scale)
0.01mm (magnetic scale) |
| Maximum number of digits |
5digits (sequence number)
7digits (coordinates) |
| Maximum display |
+99999.99
-9999.99 |
| Maximum response |
60m/min. (optical)
250m/min. (magnetic magnetic) |
| Scale accuracy |
(0.02+0.03) L mm (optical)
(0.05+0.01) L mm (A, E TYPE)
(0.03+0.01) L mm (J-SYSTEM) |
| Electricity |
AC100-250V ±10% (50/60Hz) single phase |
| Power consumption |
Max. 60VA |
| Ambient environment Ambient temperatures |
0-40° (in operation)
-20-60° (not in operation) |
| Ambient humidity |
20-80% (in operation)
8-80% (not in operation)
(However, the maximum wet bulb temperature is 29 degrees, without condensation.) |
|
|
|
|
|
|
 |
|
|
|
 |
|
Laymatic-PRO II N with a graphic and editing function, is a user-friendly digital processor.
Measurement data and their forms are displayed in real time, so it is possible to immediately judge whether the measurement data is good or not or whether there is any lacking measurement or not. This arrangement allows making retrace processes fewer.
Almost all the functions for measurement, being ionized, can be handled easily with a touch panel. |
|
|
|
|
|
|
|
|
The operation depends on simply a touch panel type TFT display attached at the head of the layout machine (the note PC can be used in place of TFT display). |
|
Measurement data are displayed in real time, so one can judge whether it is good or not, thus enabling eliminating the process of trace back for re-measurement. In addition, there is an editing function for correction, elimination and adding. |
|
All the commands are icon-symbolized and can be used easily without memorizing the commands |
|
As output interface, there are RS232C, LAN and USB. |
|
|
|
|
|
|
|
|
|
|
|
| Laymatic VIEW System |
| Display |
8.4inchTFT |
| Reading type |
magnetic |
| Reading minimal |
0.01mm |
| Maximum number of digits |
5digits (sequence number)
7digits (coordinates) |
| Maximum display |
+99999.99
-9999.99 |
| Maximum response |
250m/min. |
| Scale accuracy |
(0.05+0.01) L mm (A, E TYPE)
(0.03+0.01) L mm (J-SYSTEM) |
| Electricity |
AC100-250V ±10% (50/60Hz) single phase |
| Power consumption |
Max. 70VA |
| Ambient environment Ambient temperatures |
0-40° (in operation)
-20-60° (not in operation) |
| Ambient humidity |
20-80% (in operation)
8-80% (not in operation)
(However, the maximum wet bulb temperature is 29 degrees, without condensation.) |
|
|
|
|
|
|
|
