|
|
 |
 |
 |
 |
|
|
|
|
|
|
| in mm |
| Type |
A |
B |
C |
D |
E |
F |
Precision (/axis) |
Weight (kg) |
| 2113JM |
1300 |
430 |
2010 |
2120 |
270 |
3050 |
±0.08 |
450 |
|
|
| When using the frame dedicated for the Layout Machine, the precision means a requirement for each axis, given based upon the TTS's inspection procedure. |
|
 |
|
|
|
|
 |
The column of the arm is made of carbon, featuring high accuracy, high rigidity and light weight (weight of the main body 450 kg). |
|
With a special system at the base, the model can be changed in direction and setting on the base plate, without needing help of any technical person. |
|
With a special system at the base, the semi-automatic measurement with semi-linear stroke range reaches all the surface of the base plate. |
|
The machine can be set on the base plate in a same way as for setting a conventional layout machine. When setting the standard, all one has to do is putting it on the base plate. |
|
Easy setting of the axial standard; insert the guide rail pin into the standard groove for a conventional layout machine. |
|
The small biaxial processing head allows change in spindle's direction at steps of 15 degrees/Following the change, the coordinates are altered automatically. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
| in mm |
| Type |
A |
B |
C |
D |
E |
F |
Precision (/axis) |
Weight (kg) |
| MM23H |
1400 |
550 |
2470 |
2350 |
370 |
3650 |
±0.1 |
2000 |
|
|
| When using the frame dedicated for the Layout Machine, the precision means a requirement for each axis, given based upon the TTS's inspection procedure. |
|
|
|
|
|
|
|
This is a layout machine featuring a high rigidity, with the aluminum arm and steel column.Processing covers clay models and soft material (resin) models. |
|
Equipped with a dust collector and curtain to protect dispersion of clay and resin that is produced during processing. |
|
Driving power of the motor being carried through rack & pinion, the arms ascend and descend promptly, enabling immediate and correct positional control of the axes. |
|
With a new AAC processing head, automation and unmanning are made possible in a wider range. In addition, automatic calibration may gain a higher accuracy for processing of a higher reliability. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
  |
|
|
 |
|
|
