|
|
 |
 |
 |
 |
|
|
|
|
| At a model studio, displacement can be made freely from frame to studio. This is an authentic NC processor for surface working of clay models with simplified preparation steps and operations. |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
 |
The column of the arm is made of carbon, featuring high accuracy, high rigidity and light weight (weight of the main body 450 kg). |
|
With a special system at the base, the model can be changed in direction and setting on the base plate, without needing help of any technical person. |
|
With a special system at the base, the semi-automatic measurement with semi-linear stroke range reaches all the surface of the base plate. |
|
The machine can be set on the base plate in a same way as for setting a conventional layout machine. When setting the standard, all one has to do is putting it on the base plate. |
|
Easy setting of the axial standard; insert the guide rail pin into the standard groove for a conventional layout machine. |
|
There are two modes of operation to be shifted easily, motorized or manual operation, according to purpose. |
|
There is a multipurpose remote control by which it is possible not only to perform almost all kinds of operations, but also to display the coordinates on a miniature display panel. Manual possessing intervention also is possible with a small MPG. |
|
By the use of a CLAY CAM (option), it is easy to create the NC path rapidly from surface data and STL data. |
|
|
|
|
|
|
|
|
|
|
|
| Portable Mill System |
| Stroke |
Arm axis |
1300mm |
| Base axis |
2120mm |
| Column axis |
2370mm |
| However, measurement is possible up to the stroke limit of a base plate in the case of using a semi-automatic measurement mode. |
| Accuracy in machine movement (at 20°) |
±0.08mm/axis for each axis |
| Motor drive control axis |
three axes, x, y and z |
| Axes to be simultaneously controlled |
5 axes in stationary state, and 3 axes simultaneously |
| Spindle power |
0.48 N·m |
| Spindle setting direction |
0 to 120° for A axis (15° step) |
| 0 to 180° for B axis (15° step) |
| Driving speed |
RAPID 0 to 10M/min. |
| JOG 0 to 1.2M/min. |
| Processing speed |
0 to 5M/min.(MaxF5000) |
| Input media |
CD-R or LAN |
| Electricity |
AC100V ±10% 50/60Hz |
|
|
 |
|
|
