Gap-NINJA

TBT_汎用DB：プロダクト詳細（英語）

Japan’s first, gap & flush testing system at the world’s fastest just by pulling the trigger

Easy: Simple operation, just pull the trigger once
Instantaneous: Results for level difference and clearance display on a touch panel display as fast as 1.2 seconds
Aim and fire: Detects deep lying grooves using a compound lens camera
Team measurement: A single unit can be used to take measurements, if a PC is available, up to 4 units can be used for cooperative measurement.

Measurements can be performed very quickly like Ninja with high reliability.

Measuring time of 1.2 seconds
Capture the profile of the cross-section hit by the laser that you want to measure to calculate flush & gap.
Automatic judgment and dimension logic editing
In addition to the standard profile calculation logic, user can easily create own logic. If logic is registered in advance, the results can also be automatically calculated.
Replaceable battery
Powered time of 4 hours. Handy operation is also possible because of WiFi communication when combined with a PC.
Application cutomization
When combined with a PC, measurement locations can be displayed, servers can be data linked, and information for individual work pieces can be read.

Cross-section analysis area [mm]	W40 x D20
Stand off [mm]	33
Detection variance [mm]	0.1 or less
Battery powered time [h]	3
Possible recharge number of times	500 times
Recharge time [h]	4
Weight (with battery equipped) [g]	800g
External dimensions [mm]	L220 x W140 x H222
Touch panel display	4-Inch resistive-film type
Prongs	3-Point contact and bolts can be removed/installed
Automatic color identification function	Yes
Sensor position	Perpendicular to laser surface ± 8° Pitch angle and roll angle
NG sensor position	Sensor deviation ± 5 mm
Required test environment	When light such as sunlight, LED lighting and fluorescent lighting does not reflect on the camera
Temperature	0 to 40℃ (non-condensing)
Wireless LAN communication distance	10 m with no obstructions