Portable and laser-tracker-based direct scanning system
Product Description
The Leica Absolute Tracker Scanner ATS600 system is a new Leica 3D measurement system that seamlessly implements conventional laser tracker and reflector measurement and direct scanning without tools.
ISO 10360-10: Compliance for Laser Tracker Measurement
The Leica Absolute Tracker is fully compliant with ISO 10360-10, the international standard that defines performance evaluation methods for laser tracker measurement. This standard guarantees measurement accuracy and reliability against globally recognized benchmarks, ensuring confidence across a wide range of applications from manufacturing to quality inspection. With performance certified to international standards, the Leica Absolute Tracker is ready to meet even the most demanding global quality requirements.
Product Features
- Measurement range
Direct scanning measurement: possible up to 60m (diameter 120m)
Reflector measurement: possible up to 80m! (Diameter 160m) - Wide range 3D data acquisition like area scanner is possible with higher accuracy
- Point measurement without reflector is possible
- Reflector measurement is also possible
- The power lock system can automatically lock on the laser beam to the reflector!
- Dustproof and waterproof IP54 compatible
- Battery powered, cableless operation
- 1kHz data output (dynamic measurement possible)
- High speed scanning
Product Specifications
| 【Accuracy】 | |
|---|---|
| ＊Reflector measurement | |
| Absolute angle performance（1） | ± 15 μm + 6 μm/m |
| Length measurement (EUni:0:LT,MPE)（2） | ± 100 μm |
| All accuracies specified as Maximum Permissible Error (MPE). Typical values are half of MPE. | |
| ＊Non-contace measurement | |
| Range noise（3） | < 80 μm |
| Absolute accuracy（4） | < ± 300 μm |
| 【Measurement area】 | |
| Reflector measurement (radius) | 0.8 ～ 80 m |
| Non-contact measurement (radius) | 1.5 ～ 60 m |
| 【Speed】 | |
| Scanning speed | 1 kHz |
| Scanning rate (5) | < 10 sec/㎡ (Fast Mode) |
| < 135 sec/㎡ (Standard Mode) | |
- Angular Performance Transverse eT according to ISO 10360-10:2016, with respect to an MPE for the Location Error (LDia.2×1:P&R:LT,MPE)
in accordance with chapter 6.3 of ISO 10360-10:2016 of ± 30 μm + 12 μm/m. - In accordance with ISO 10360-10:2016 Chapter 6.4, Table 4, positions 1 to 35.
- Standard deviation (1σ ) of a best-fit plane (78% albedo), distance 1.5 to 30 metres, standard measurement mode, target aligned.
- Maximum Deviation (MPE) of the absolute position of a plane (78% Albedo), 1.5 to 30 metres, 0 to ± 45° incidence angle.
- At default point-to-point and line-to-line distance (10 metres).
